Prevent Water Condensation In Your Home our Building
Protect your homes and buildings from moisture, dampness, and condensation with Vapor Barriers. Made from industrial grade polyethylene resin, our vapor barriers are waterproof and resistant to many chemicals. Plus they have 50% more tear strength than competing foreign-made poly sheeting (typically 3 mil thick). They are the perfect moisture barrier for:
- interior walls
- crawl space
- exterior walls
- underlayment
- under concrete slabs
- under laminate flooring
When using vapor barriers for crawl spaces 6 Mil Vapor Barrier are the bare minimum thickness. If the crawl space is going to have people walking over it for regular maintenance, have items stored on top of it, or it is going to be placed on top of items that may puncture the material like rocks, then we recommend the 10 Mil Vapor Barrier.
*Always check your building codes to ensure you are installing the correct thickness of vapor barrier.
Specs
- Material: Virgin Polyethylene (plastic)
- Thickness: 6 mil or 10 mil
- Typical plastic sheeting is only 3 mil thick, half as thick as ours
- Sizes: 10 ft x 100 ft, 20 ft x 100 ft, or 40 ft x 100 ft
- Color: Black
- UV inhibitor: 200 UV hours
Features
- TRUST IN AMERICAN MADE - Made in Los Angeles, California, Sandbaggy vapor barrier rolls are built to be used and stretched. Foreign made plastic sheet tears easily like paper. Support American jobs!
- SUPERIOR TEAR STRENGTH - Sandbaggy Poly Sheeting Rolls have 50% more tear strength than competing foreign-made sheeting! This means that your sheeting will not fail on you when you need it most!
- HEAVY DUTY - Strong enough to be used for construction, industrial and agricultural applications. Sandbaggy Polyethylene Vapor Barriers meets and exceeds ASTM D4397 Standard Specifications.
- VIRGIN POLYETHYLENE: Less likely to break, our polyethylene vapor barriers are not made from recycled materials.
- EASY TO CUT - With a pair of scissors, you can easily cut the plastic sheeting to the desirable length and width for the specific application.
- REUSABLE - Each Sandbaggy roll is massive and can be REUSED over and over again until it tears and breaks down.
Other names for Vapor Barriers are visqueen barrier or a vapor retarder.
Moisture Barrier Uses
Sandbaggy Vapor Barrier provides moisture protection:
- Over concrete substances.
- Use on/below and above grade
- Polyethylene Film for laminate engineered wood flooring
Installaing Your Vapor Barrier
- Make sure your subfloor is level, clean, and dry. You do not want anything that could potentially tear the vapor barrier on the floor, such as protruding nails or rocks. If installing over concrete, make sure the moisture emission rates do not exceed 31 lbs. per 1000 square feet per 24 hours as measured by the Anhydrous Calcium Chloride Test,
- Apply Butyl Tape to walls, this will ensure when you run your vapor barrier up the walls that it will stick.
- Choose a corner of the room and roll out your vapor barrier sheeting. Make sure your vapor barrier is:
- Parallel to the wall
- Running in the opposite direction that you plan to install the flooring planks.
- 1/2" to 3/4" away from the wall
- Overlap your vapor barrier sheeting with another sheet that will run up the wall (covering the 1/2" to 3/4" inch gap). Apply Vapor Barrier Seam Tape to stick the vapor barrier sheets together.
- Make sure it runs up the walls around 4-6".
- It should overlap the other sheet by 6".
- After the flooring is installed, trim, the excess underlayment back to the height of the finished floor. Do this prior to installing a base or molding
FAQs
Is black vapor barrier better than clear?
Black vapor barriers are more effective at stopping moisture evaporation, since the darker color assists in preventing plant growth. When plants grow they emit moisture. This is why black is the typical color choice for weed barriers.