Cleaner Form Removal. Better Concrete Finishes.
Get cleaner releases, smoother concrete surfaces, and longer-lasting forms with our mineral oil-based Concrete Form Release Oil. Designed for professional contractors, this low-VOC formula creates a thin barrier between concrete and formwork, helping forms separate easily while reducing bugholes, surface imperfections, and cleanup time.
Unlike harsh release agents, this non-staining formula is compliant with VOC regulations in all 50 states, including California. The result is cleaner forms, improved labor efficiency, and a healthier jobsite environment without sacrificing performance.
- Forms must be thoroughly cleaned before application. Dirt, debris, or concrete buildup can negatively affect the finished concrete surface.
- Apply a thin, consistent coating. Overapplication may increase dusting, bugholes, and other surface defects.
- Always use proper PPE and follow jobsite safety procedures during handling and application.
Specs
- Product Type: Concrete Form Release Oil
- Base: Mineral Oil
- Size: 5 Gallon Pail
- VOC Content: Less Than 100 g/L
- Appearance: Non-Staining Formula
- Compliance: VOC Compliant in All States, Including California
- Recommended Application: Sprayer, Mop, Roller, or Brush
- Made In: USA
Approximate Coverage Per Gallon
- Steel Forms: Up to 2,500 sq ft
- Aluminum Forms: Up to 2,500 sq ft
- Rubber Forms: Up to 2,500 sq ft
- Wood / HDO / BBO Forms: Up to 2,000 sq ft
- Plywood Forms: 1,500–2,000 sq ft
Features
- Cleaner Concrete Finishes – Helps reduce bugholes and surface imperfections for a smoother, more professional-looking concrete appearance.
- Fast, Easy Form Release – Creates a consistent barrier that allows forms to separate cleanly, reducing sticking and minimizing damage during stripping.
- Lower Labor Costs – Cleaner form removal means less scraping, cleaning, and rework, helping crews move faster between pours.
- Extends Form Life – Reduces concrete buildup and wear on form surfaces, helping maximize the lifespan of expensive formwork.
- Low VOC Formula – Contains less than 100 g/L VOCs and complies with regulations in all states, including California.
- Works With Multiple Form Types – Suitable for steel, aluminum, rubber, wood, HDO, BBO, and plywood concrete forms.
Application Instructions
Surface Preparation
- Ensure forms are clean and free of concrete residue, dirt, dust, oil, and debris.
- Properly cleaned forms produce the best concrete finish and release performance.
Application
- Recommended application method: Sprayer with an 8001 flat fan spray tip.
- Spray pattern: 80° fan, 0.1 GPM, minimum 40 PSI.
- May also be applied using a mop, roller, or brush.
- Apply a thin, continuous coating across the entire form surface.
Cleanup
- Remove excess material from equipment using a putty knife and brush.
- If necessary, use a mild cleaner or solvent for final cleanup.
**Safety Information**
- Wear appropriate PPE during handling and application.
- Avoid contact with eyes, skin, and clothing.
- Keep away from sparks, open flames, and high heat.
- Vapors may irritate the nose, throat, and lungs.
- Use with adequate ventilation.
- If swallowed, contact Poison Control and seek immediate medical attention. Do not induce vomiting.
- Store in a cool, dry, well-ventilated area with the container tightly closed when not in use.
FAQs
Will this stain concrete or cement surfaces?
No. This formula is designed to be non-staining when applied properly according to instructions.
Can this form release be used on wood concrete forms?
Yes. It is suitable for wood, plywood, steel, aluminum, fiberglass, and plastic concrete forms, helping promote easier form removal and cleaner concrete finishes.
Is this concrete form release oil compliant in California?
Yes. The formula contains less than 100 g/L VOCs and is compliant with VOC regulations in California and all other states.
What type of sprayer should I use to apply form release?
Yes. Apply a thin, even coat using a low-pressure sprayer for optimal coverage and easier form removal. Recommended application method: Sprayer with an 8001 flat fan spray tip.