Install Long-Lasting, Compliant ADA Warning Tiles
Ensure pedestrian safety with Sandbaggy's 24" x 24" cast in place ADA tile. The tactile panel features robust truncated domes for reliable wet-set concrete installations, offering durable compliance.
Our ADA Compliant Tile uses a high-performance composite with a unique anchoring system. Its industry-leading quality provides long-term value for any tactile paving project. Looking for more options? Shop all Sandbaggy ADA Warning Pads & Tiles.
- Wet Concrete Only: Designed exclusively for fresh, wet concrete installation. Incorrect application voids compliance.
- ADA Placement Critical: Installer is responsible for ensuring placement meets all current federal, state, and local ADA guidelines. Non-compliant placement is a safety hazard.
- Professional Installation Recommended: Proper installation is crucial for safety, compliance, and longevity. Refer to full installation guide.
- Use PPE: Always wear appropriate safety gear.
Specs
- Size: 24" x 24"(2' x 2')
- Material: High-Performance Glass-Reinforced Thermoset Composite
- Anchoring: Integrated Concrete Anchors
- Dome Type: In-line (Square Grid) Truncated Domes
- Dome Height: 0.2"
- Dome Base Diameter: 0.9"
- Dome Top Diameter: 0.45"
- Dome Spacing (Center-to-Center): 2.35"
- Color: Federal Yellow (Standard)
- Compliance: Meets ADAAG, PROWAG, California Title 24. Conforms to multiple ASTM standards for durability and safety (see Compliance section).
- Weight: 13 lbs (approx.)
Features
- Superior Durability & Strength: Robust glass-reinforced thermoset composite resists impact, wear, UV fading, weather extremes, and common chemicals/de-icing salts.
- Anchoring: Ensures a secure, permanent embedment into wet concrete, preventing air voids and enhancing longevity.
- Full ADA & CA Title 24 Compliance: Meets or exceeds all government requirements for detectable warning surfaces, including dome geometry and visual contrast.
- Enhanced Pedestrian Safety: Features slip-resistant texture and precisely engineered truncated domes for optimal detectability underfoot and by cane.
How to Install
Installing your Cast in Place Tile correctly ensures its long life and ADA compliance. This is a guide for those familiar with concrete work:
- Plan & Prep: Before pouring, confirm your layout and placement meet project plans and applicable ADA requirements. Ensure the subgrade, forms, and work area are ready. Your tiles arrive with a protective top film – keep this film on.
- Pour & Check Workability: Pour concrete to the specified grade. It needs a 4-7-inch slump. Wait for it to reach a semi-solid state – firm enough to support the tile, workable enough to embed it.
- Set Your Tile: Position the tile in the required location (protective film still on). Press the tile into the wet concrete, then use a rubber mallet to tap evenly until the tile base is flush and level with the surrounding surface. Do not step on the tile to embed it..
- Finish Around Tile: Finish adjacent concrete per project specifications while the concrete remains workable. If required, tool an expansion joint around the tile perimeter.
- Cure & Clean Up: Allow concrete to fully cure per the concrete manufacturer’s instructions before opening to traffic. After curing and once construction is complete, carefully remove any protective film (use a utility knife along edges if needed).
Compliance and Application
Guaranteed Compliance: Sandbaggy ADA Compliant Tiles meet/exceed key standards:
- ADAAG (Section 705: Detectable Warnings)
- PROWAG (Public Right-of-Way)
- California Title 24 (CBC)
- Relevant ASTM standards for slip resistance, impact/wear resistance, strength, and durability (matching leading industry benchmarks).
Primary Applications: This ADA Warning Tile is essential for: Curb ramps, transit platforms, pedestrian crossings, accessible parking pathways, building entrances, stair approaches, and any location requiring tactile warnings for pedestrian safety adjacent to vehicular ways or grade changes. Designed for new concrete pours.
Sandbaggy Public Safety Equipment
Protect your community with reliable public safety products from Sandbaggy. Our lineup includes ADA tiles, chain link fences, sign posts, safety railings, delineator posts, and more — all designed to enhance safety, organization, and accessibility.
We offer a wide variety of products for municipalities, contractors, and public works projects, providing practical, long-lasting solutions for traffic control, pedestrian safety, and site management.
Many of our products meet local and federal standards, ensuring compliance, durability, and easy installation — keeping your projects running safely and efficiently.
FAQ
What material are cast-in-place ADA tiles made from?
They are made from a high-performance, glass-reinforced thermoset composite, engineered for superior durability, impact resistance, UV stability, and slip resistance.
What are the standard dimensions of the truncated domes?
Our Truncated Domes are 0.2" high, with a 0.9" base diameter and 0.45" top diameter, spaced 2.35" center-to-center in an inline grid, fully meeting ADAAG specifications.
What are other names these ADA Pads might go by?
- truncated domes sidewalk
- detectable warning mats
- truncated dome pavers
- detectable warning plates