Rapid ADA Compliance: 3 ft x4 ft Bendable, Mesh-Reinforced Tile
Get ADA compliance fast with Sandbaggy's 36" x 48" Flexible Peel & Stick Tile. This mesh-reinforced tactile paving uses peel-and-stick tech for efficient installs. Bond the mat securely to concrete or asphalt in 5 mins. No glue, special tools, or drilling needed—great where anchors are prohibited.
Durable, flexible polyurethane provides longevity. The tile bends to fit uneven surfaces, preventing trip hazards and promoting full adhesion with less prep. Tough against traffic/weather, it resists chipping, cracking, and splintering. Made in USA, this kit includes sealant for a complete, reliable ADA warning solution.
Please Note*
- Lead Time: Approx. 5 Business Days
- Included Accessories: Polyurethane Sealant (MasterSeal NP1), Concrete Screws, Washers
Specs
- Product: Flexible Mesh-Reinforced ADA Tile
- Size: 3 ft x 4 ft (36" x 48")
- Weight: 17 lbs
- Material: High-Durability Flexible Polyurethane (UV Protected)
- Reinforcement: Internal Mesh
- Installation: Surface Applied - Peel & Stick
- Adhesive: Integrated Multi-Surface System
- Dome Type: Truncated Domes
- Dome Height: 0.2 inches
- Dome Top Diameter: 0.45 inches
- Dome Base Diameter: 0.9 inches
- Dome Spacing: 2.4 inches center-to-center (Inline Pattern)
- Slip Resistance: Meets ADA Requirements
- Available Colors: Safety Yellow
- Origin: Made in USA
- Included Accessories: Polyurethane Sealant (MasterSeal NP1), Concrete Screws, Washers
Features
- 5-Minute DIY Install: Exclusive peel-and-stick technology allows for rapid installation; simply peel backing and apply pressure.
- No Anchors Required (Where Prohibited): Ideal for sensitive substrates like post-tension slabs or parking decks where drilling is not allowed. Preserves surface integrity.
- Highly Flexible & Bendable: Conforms naturally to uneven ground, slight contours, and irregular surfaces for a secure, trip-free fit.
- Multi-Surface Adhesion: Advanced integrated adhesive bonds reliably to both clean concrete and asphalt surfaces.
- Unbreakable Mesh-Reinforced Polyurethane: Robust material with internal mesh reinforcement resists chipping, cracking, and splintering from traffic and weather; UV protection minimizes fading.
- Radius Ready Option: Available in wedge shapes ("Radius Ready") for straightforward installation on curved ramps and pathways.
How To Install
- Prepare Surface: Ensure the target concrete or asphalt area is structurally sound, clean, completely dry, and free of contaminants. Use a stiff wire brush, broom, and blower as needed.
- Check Temperature: Install only when surface and ambient temperatures are 50°F (10°C) or higher and rising. Confirm the substrate is fully cured if new.
- Position Tile: Dry fit the tile to confirm alignment per ADA guidelines (e.g., 6-8 inches from curb edges). Leave a 1/8" gap between adjacent mats if needed.
- Peel Backing: Carefully remove the entire protective liner from the adhesive, avoiding contact with the adhesive surface.
- Apply Tile: Starting from one edge, carefully place the adhesive onto the prepared surface. Roll or press firmly onto the substrate, working outwards.
- Ensure Full Contact: Apply consistent, significant pressure across the entire tile surface (using body weight or weighted roller is recommended) to maximize bond and remove air pockets. Firmly press all edges.
- Apply Included Edge Sealant: Use the provided polyurethane sealant (e.g., MasterSeal NP1 or similar). Apply a smooth bead into the gap around the entire perimeter, ensuring it seals between the mat edge and the substrate to prevent moisture ingress.
- Optional Anchoring (If Needed): For specific project requirements or on challenging surfaces where additional mechanical fastening is desired, use the provided concrete screws and washers. Typically, place at corners and/or mid-points. Pre-drill pilot holes through the tile and into the substrate using an appropriate masonry bit. Secure fasteners until snug; do not overtighten to avoid damaging the tile or substrate.
- Ready for Use: The tile is typically ready for foot traffic immediately. The included MasterSeal NP1 sealant usually skins within 24 hours and achieves full cure in approximately 7 days. Protect the sealed edges from heavy disturbance or prolonged water exposure during the full curing period if possible.
Compliance and Application
- Compliance: Fully compliant with current ADA Accessibility Guidelines (ADAAG) and Public Right-of-Way (PROWAG) requirements for detectable warning surfaces. Specifically meets:
- ADAAG Section 705: Detectable Warnings requirements.
- Dome Size & Spacing (705.1.1, 705.1.2): Features compliant truncated dome geometry (0.2" height, 0.9" base, 0.45" top) and spacing (2.4" center-to-center, inline pattern).
- Visual Contrast (705.1.3): Available in Safety Yellow to provide required visual contrast.
- Surface Characteristics: Provides required tactile warning texture and meets slip resistance standards.
- PROWAG Sections R208 & R305: Suitable for requirements in the public right-of-way.
- Primary Applications: Provides essential tactile warnings on pedestrian routes including curb ramps, transit platform edges, parking area transitions, accessible building entrances, pathway hazard warnings, tops/bottoms of stairs, and vehicular way crossings.
Important Considerations for Long-Last Use
- Achieve Full Adhesion: Using maximum pressure (body weight/roller) across the entire tile, especially edges, eliminates air pockets and ensures the strongest possible bond to prevent future lifting or moisture entry.
- Use Edge Sealant: Applying sealant around the perimeter is highly recommended to protect the adhesive bond from water intrusion, freeze-thaw cycles, and edge damage, significantly extending the installation's lifespan.
- Avoid Harsh Chemicals: Clean tiles only with mild detergents; avoid solvents or abrasive cleaners that can degrade the polyurethane or the adhesive bond.
- Regular Inspection: Periodically check edges and overall bond, especially in high-traffic or harsh weather areas. Re-apply edge sealant promptly if degradation is noted to maintain integrity.
- Sealant & Optional Anchors: To extend lifespan, apply the included edge sealant, protecting the bond from water and damage. If using optional anchors, install them correctly (do not overtighten) to prevent tile or substrate damage.
FAQ
How long should this peel-and-stick tile last?
Designed for long-term service, often meeting or exceeding typical 5-year expectations under normal conditions with proper installation (clean/dry surface, edge sealant) and maintenance. Actual lifespan depends heavily on traffic, climate, and install quality.
How durable is the "unbreakable" claim?
The flexible, mesh-reinforced polyurethane is highly resistant to cracking, chipping, or splintering common with rigid tiles under normal foot traffic and weather impacts.
Will the yellow color fade significantly?
The material includes UV inhibitors designed to resist color fading from sun exposure, helping maintain ADA-required visual contrast over time.
What is the minimum installation temperature?
Install only when both surface and air temperatures are 50°F (10°C) or higher and expected to remain so, ensuring proper adhesive bonding.
What other names is this ADA tile known by?
Commonly called: flexible ADA pad, warning mat, surface mount tactile paving, peel-and-stick truncated dome tile, mesh-reinforced ADA tile.